Shop

Floppy Cutter 122 x 122 cm/48 x 48'' square flag Floppies are similar to cutters but w/additional hinged fabric 10 mm/ 3/8'' mounting pin for easy connection to grip heads Strong webbing around frame for added durability. Additional fabric is hinged on the 122 cm/48'' side

28mm socket 28mm pin Chrome plated steel 50cm length (19,6 in)

Durable chrome steel TVMP adapter with 16 mm/ 5/8'' socket Threaded Top Bolt allows for quick connection to lighting yokes Addition of a set screw for added security and safety Easily remove T-Knob when needed to convert to a Junior Stud Works with Junior receivers, baby studs and baby spigots

20'' short Turtle Base C-Stand in black chrome steel Great for holding low lights, flags and gobos Works great with D200b grip head & D500b series grip arms Detachable column allows for additional junior accessories. 3 sections, 2 risers. Ø: 35, 30, 25 mm. Leg Ø: 25 mm/0.98''

Pro-grade, locking GripTight™ with 4 modes of operation Tilt and landscape-to-portrait mode for streaming & vlogging Mirrorless, point-n-shoot, 360, action cams up to 1 kg (2.2 lbs) Tripod telescopes from 34-79 cm (13.5-31 in) for extended reach Legs click-set into 3 positions for stability...

20'' short standard/fixed base C-Stand in black chrome steel Robust black chrome finish! Not powder coated. Works great with D200B grip head & D500B series grip arms Legs fold flat for easy transportation and quick set-up. 3 sections, 2 risers. Ø: 35, 30, 25 mm. Leg Ø: 25 mm/0.98''

Compatibility:  Kippertie Revolva RF/PL

Patented GorillaPod ball and socket design with rubberized grips Secure primary camera plus 2 devices totaling up to 5kg (11lbs) Precision engineered ball head with Arca-Swiss® plate Removable Hub Plate adapter features two female ¼”-20 mounts Two 6-socket GorillaPod arms with 1/4''-20...

Precision engineered ball head featuring a bubble level, 1/4''-20 quick release clip and the strength to support up to 6.6 lbs (3 kg) of equipment. Mount DSLR & mirrorless cameras, strobes & flashes 360° panning bed and 90° tilt for optimal control Quick release plate & bubble level...

- 2 x Arri locating points- 1 x cold shoe mount- 1/4" mounting points- Attachment: 3/8" thread + Arri locating pins- No-tools adjustment- Lightweight construction- Modern design

board is not supplied reflector board holder from 5mm (0.2 in) to 25mm (1 in)

chrome plated steel 2 x 16mm pins 16mm receiver

20'' short Lazy-Leg/Levelling Leg C-stand in silver chrome steel. Sliding leg, lazy leg or Rocky Mountain leg, great for stairs. Works great with D200 grip head & D500 series grip arms Legs fold flat for easy transportation and quick set-up. 3 sections, 2 risers. Ø: 35, 30, 25 mm. Leg Ø: 25...

Mount pro-level DSLR & mirrorless cameras, strobes & flashes Versatile ball head fits any tripod, 3/8'' adapter included ¼''-20 Arca-Swiss compatible quick release plate 360° panning bed and 90° tilt for optimal control Adjustment knob easily locks BallHead 5K into place

Ideal for suspending light fixtures or other items overhead 201 cm/79.1'' long; Junior receiver Load capacity: 40 kg/88 lbs Universal head with 28 mm/ 1 1/8'' socket & 16 mm/ 1 1/8'' pin Tommy bar on grid clamp included: No tools required Grid clamp works on diameters Ø 25-55 mm/1-2.16''

Super Cardioid Pickup Pattern Out-of-the-box compatibility with Cameras, Recorders, Smartphones, Laptops, Tablets RF-Resistant Low Cut Built In: 75Hz & 150Hz Internal Rechargeable Lithium Battery Supplying >50 Hours Run Time

20'' short Lazy-Leg/Levelling Leg C-stand in black chrome steel. Robust black chrome finish! Not powder coated. Sliding leg, lazy leg or Rocky Mountain leg, great for stairs. Works great with D200B grip head & D500B series grip arms 3 sections, 2 risers. Ø: 35, 30, 25 mm. Leg Ø: 25 mm/0.98''

Key features: Two mounting screws (upper and lower) Anti-twist locking pins on the bottom 1/4" mounting points Cold shoe mount Undisturbed access to camera features Ergonomic shape Safe and comfortable grip One piece of air aluminum

Ideal for bases with 28mm receiver Black chrome steel 3 sections column Maximum Height: 206cm Available also in silver

Key features: Mounting bracket + HDMI & USB-C clamp Aluminum made Adjustable

INCLUDED IN BOX1x W.Lav Mic1x Foam Windscreen1x Rycote Stickies and UndercoverTape1x Carrying Pouch

30'' Turtle Base C-Stand in black chrome steel Robust black chrome finish! Not powder coated. Turtle base legs & C-stand column separate for easy transporting Works great with D200B grip head & D500B series grip arms 3 sections, 2 risers. Ø: 35, 30, 25 mm. Leg Ø: 25 mm/0.98''

Key features: QR system NATO standard- Safety pin Mounting solution for ARRI NATO accessories M6 center opening Right/left handle adjustment Aluminum made

Key features: 1/4" mounting points 3/8" top&bottom thread Cold shoe Strap holder Ergonomic design 3 poinst of cage-to-camera attachment (bottom screw & pin, eyelet attachment) Easy access to plugs, slots, and buttons Lightweight - Aluminum made

Load capacity: 90kg Available in silver A9000N  Designed for square legs that measure 20x20mm or 25x25mm

INCLUDED IN BOX1x Deity W.Lav1x Microphone Tie Clip1x Deity Microdot Adapter DA351x Faux Fur Windscreen2x Foam Windscreen1x Hook and Loop Cable Wrap1x Carrying Pouch

Load capacity: 90kg Available in black A9000BN  Designed for square legs that measure 20x20mm or 25x25mm

30'' Standard/Fixed base C-Stand in black chrome steel Robust black chrome finish! Not powder coated. Works great with D200B grip head & D500B series grip arms Legs fold flat for easy transportation and quick set-up. 3 sections, 2 risers. Ø: 35, 30, 25 mm. Leg Ø: 25 mm/0.98''

Key features:- Compatibility with Sony FX3 and FX30- Two-piece clamp- Adjustable span- Aluminum made

Pro-Grade smartphone mount includes removable Cold Shoe PRO mount for mounting accessories. Secure any smartphone in the pro-grade, locking GripTight™ mount Adjust tilt and landscape-to-portrait for streaming or vlogging Add devices like a mic or light to the removable Cold Shoe PRO Remove Cold...

INCLUDED IN BOXW.Lav Micro Microphone Foam Windscreen Rycote Stickies and Undercover Medical Tape Carrying Pouch

30'' Lazy-Leg/Levelling Leg C-stand in silver chrome steel. Sliding leg, lazy leg or Rocky Mountain leg, great for stairs. Works great with D200 grip head & D500 series grip arms Legs fold flat for easy transportation and quick set-up. 3 sections, 2 risers. Ø: 35, 30, 25 mm. Leg Ø: 25...

Key features: Three-piece clamp Adjustable span Aluminum made

Lightweight cold shoe adapter for attaching accessories Attaches via standard 1/4”-20 mount Shoe constructed of durable ABS plastic Stainless steel 1/4”-20 threads DEVICES Flash & LED, Mic (cold shoe) ATTACHMENT TYPE 1/4"-20 standard tripod mount MATERIAL ABS Plastic, Stainless steel...

made of steel 3 extensions 28mm attachment

30'' Lazy-Leg/Levelling Leg C-stand in black chrome steel. Sliding leg, lazy leg or Rocky Mountain leg, great for stairs. Works great with D200 grip head & D500 series grip arms Legs fold flat for easy transportation and quick set-up. 3 sections, 2 risers. Ø: 35, 30, 25 mm. Leg Ø: 25 mm/0.98''

Key features: 4 points of plate-to-camera attachment Arri locating points 1/4" threaded openings Full access to camera features Strap holder One piece of aluminum Lightweight

High-quality machined aluminum cold shoe adapter for attaching accessories such as mic or LED lights. Attach via 1/4”-20 attachment to mount cold shoe accessories Constructed of machined aluminum and stainless steel Includes female 1/4”-20 adapter mount and Allen wrench WEIGHT 0.039 kg...

INCLUDED IN BOX 1x W.Lav Pro Lavalier2x Foam Windscreen5x Rycote Stickies1x Rycote Undercover1x Roll Medical Tape1x Carrying Pouch1yr Deity Microphones Warranty

Ideal for bases with 28mm receiver Black chrome steel 3 sections column Maximum Height: 139cm Available also in silver

Key features:- 1/4" mounting points- Arri locating point (3/8" mounting point on top)- Eyelet anti-twist M2.5 screw (a7sIII cage only)- Cold shoe- Strap holder- Ergonomic form- Organic shape- Easy access- Ultra Lightweight build

Decorative cutouts Material: stainless steel Female thread on both ends Available Lengths: 10, 15, 20 and 30cm

Compact and durable GoPro® style pin joint to ¼”-20 mount Mount action cams with pin-joint to tripods with a 1/4”-20 mount Constructed of durable ABS plastic and stainless steel New compact design with small footprint DEVICES Action Video Cam ATTACHMENT TYPE GoPro mount MATERIAL ABS...